TUBULAR MOTORS
Our company distributes 230V products manufactured by the ISO 9001 standard with 6 years of warranty. The tubular motor is placed into the shaft, so it does not require extra place.
MOTORS WITH MECHANIC END LIMIT
The working span (up and down end limit) of a mechanic tubular motor could be set on the head of the device with a special plastic rod. The end limits are then stored by a mechanism of several cogwheels inside the motor. Due to this solution, tubular motors have become more affordable to the public as a shading component.
MOTORS WITH ELECTRONIC END LIMIT
The end limits of an electronic tubular motors are stored in the electronic components of the circuit board inside the motor's head. It results in a more accurate setting, and quieter movement. The more advanced variants come with extra functions such as: obstacle detection and middle/favourite position setting.
Regarding the controlling devices, switch operated and radio operated motors are available in both groups. In case you desire a switch operated system, make sure to choose the correct type!
A switch operated mechanic motor with multiple switches, or multiple motors with a sole switch could only be operated with a group controller relay. In all other cases, one motor should be wired to one swithc only and vice versa.
This restriction is does not apply to the electronic switch operated motors, as they are fitted with an inner relay. Thanks to this solution, multiple motors could be controlled with a single switch, without the possibility of defection.
The restrictions above do not concern radio operated motors, as the group control option is provided by the remote control. Also, these motors require less wiring, hence less time and work is needed for installation. All the motorized shaders can be controlled simultaneously with one press of a button.
revolution system tubular motors are fitting for the following systems:
MOTORS WITH MECHANIC END LIMIT
The working span (up and down end limit) of a mechanic tubular motor could be set on the head of the device with a special plastic rod. The end limits are then stored by a mechanism of several cogwheels inside the motor. Due to this solution, tubular motors have become more affordable to the public as a shading component.
SWITCH OPERATED TUBULAR MOTORS
Revolution 35S
Revolution 35SS
Revolution 45S
Revolution 45SS
SWITCH AND MANUALLY OPERATED TUBULAR MOTORS
Revolution 45M
Revolution 59M
RADIO OPERATED MOTORS
revolution 35R
revolution 45R
RADIO AND MANUALLY OPERATED TUBULAR MOTORS
revolution 45RM
revolution 59RM
MOTORS WITH ELECTRONIC END LIMIT
The end limits of an electronic tubular motors are stored in the electronic components of the circuit board inside the motor's head. It results in a more accurate setting, and quieter movement. The more advanced variants come with extra functions such as: obstacle detection and middle/favourite position setting.
SWITCH OPERATED TUBULAR MOTORS
revolution 35BD
revolution 45BD
RADIO OPERATED MOTORS
revolution 35E
revolution 45ES
revolution 35ED/G
revolution 45ED/G
RADIO AND APPLICATION OPERATED MOTORS
revolution 35EW
revolution 45EW
revolution 45ESW
revolution 59EW
